I denne artikel lærer du om forskellige brugerdefinerede funktioner, der tager input af forskellige typer og returnerer output med eksempler.
I den forrige artikel Swift-funktioner lærte vi om funktioner. Nu ser vi på de forskellige måder og typer, vi kan oprette en funktion i Swift, dvs. håndtering af input og output i en funktion.
Funktion uden parameter og ingen returværdi
Denne type funktioner tager ingen input- og returværdi.
func funcname () (// udsagn) ELLER func funcname () -> () (// udsagn) ELLER func funcname () -> ugyldig (// udsagn)
Alle ovenstående syntaks er gyldige til at oprette en funktion, der ikke tager nogen parametre og ikke returnerer værdi.
Ovenstående syntaks func funcname() -> ()
svarer også til, func funcname() -> Void
fordi Void
det bare er en typealias af ()
. Du kan besøge Swift Typealias for at lære mere.
Eksempel 1: Ingen passerede parametre og ingen returværdi
func greetUser() ( print("Good Morning!") ) greetUser()
Når du kører ovenstående program, vil output være:
God morgen!
Funktion uden parameter men returværdi
Denne type funktioner tager ikke inputparametre, men returnerer en værdi. For at tilføje returtypen skal du tilføje pilen ( ->
) og returtypen.
func funcname () -> ReturnType (// sætningers returværdi)
Eksempel 2: Ingen parametre bestået men returværdi
func greetUser() -> String ( return "Good Morning!" ) let msg = greetUser() print(msg)
Når du kører ovenstående program, vil output være:
God morgen!
I ovenstående program har du defineret, at returtypen skal være String
. Nu skal udsagnet returnere en streng fra sætningen inde i funktionen, ellers får du en fejl.
return
nøgleord overfører kontrol over programmet fra funktionens hoveddel til funktionsopkaldet. Hvis du har brug for at returnere værdi fra funktionen, skal du tilføje værdi efter return
nøgleordet.
return "Good Morning!"
sætning returnerer værdi af typen String
fra funktionen. Bemærk, at returneringstypen og værdien skal matche.
Du kan også tildele returværdien til en variabel eller en konstant. let msg =
tildeler returværdien til den konstante msg. Så udsagnet print(msg)
udsender Good Morning! i konsollen.
Hvis du vil forsømme værdien, kan du bare bruge _
som let _ =
.
Funktion med parameter men ingen returværdi
Parametre bruges til at tage input i funktionen. Parameteren indeholder et parameternavn og typen efterfulgt af et kolon ( :
). Denne type funktioner tager inputparameter, men returnerer ikke værdi.
func funcname (parameternavn: Type) (// udsagn)
Eksempel 3: Passerede parametre, men ingen returværdi
func greetUser(msg:String) ( print(msg) ) greetUser(msg: "Good Morning!")
Når du kører ovenstående program, vil output være:
God morgen!
I ovenstående program accepterer funktionen en enkelt parameter af typen String
. Parameteren kan kun bruges inde i funktionen. msg er navnet på parameteren.
Du kan kalde funktionen ved at sende den en strengværdi med parameternavnet som greetUser(msg: "Good Morning!")
. Parameternavnet msg er kun synligt inde i funktionen greetUser()
.
Derfor print(msg)
udsender erklæringen Good Morning! i konsollen.
Funktion med parameter og returværdi
Denne type funktioner tager parametre og returnerer også værdi.
func funcname (parameternavn: type) -> ReturnType (// udsagn)
Eksempel 4: Parametre bestået og returnerer værdi
func greetUser(name:String) -> String ( return "Good Morning! " + name ) let msg = greetUser(name: "Jack") print(msg)
Når du kører ovenstående program, vil output være:
God morgen! Jack
I ovenstående program accepterer funktionen en enkelt parameter af typen String
og returnerer også værdien God morgen! Jack af typen String
.
Funktion med flere parametre og flere returværdier
Denne type funktioner tager flere parametre, der er adskilt med komma og returnerer også flere værdier. Du kan returnere flere værdier i Swift ved hjælp af Tuples. Se Swift Tuples for at lære mere om det.
func funcname (parameternavn: type, parameternavn2: type,…) -> (ReturnType, ReturnType …) (// udsagn)
Eksempel 5: Flere parametre bestået og flere returværdier
func greetUser(name:String, age:Int) -> (String, Int) ( let msg = "Good Morning!" + name var userage = age if age < 0 ( userage = 0 ) return (msg, userage) ) let msg = greetUser(name: "Jack", age: -2) print(msg.0) print("You have (msg.1) coins left")
Når du kører ovenstående program, vil output være:
Godmorgen! Jack Du har 0 mønter tilbage
I ovenstående program greetUser()
accepterer funktionen flere parametre af typen String
og Int
. Funktionen returnerer også flere værdier som en tuple af typen String
og Int
.
For at få adgang til hver returværdi bruger vi indekspositioner 0, 1, … Her har vi brugt msg.0 til at få adgang til Good Morning! Jack og msg.1 for at få adgang til 0 .
Brug af indekspositioner kan til tider være uintuitivt og ulæseligt. Vi kan løse dette problem elegant ved at give navne til at returnere værdier. Ovenstående program kan også omskrives som nedenfor.
Example 6: Multiple return values with name
func greetUser(name:String, coins:Int) -> (name:String, coins:Int) ( let msg = "Good Morning!" + name var userCoins = coins if coins < 0 ( userCoins = 0 ) return (msg, userCoins) ) let msg = greetUser(name: "Jack",coins: -2) print(msg.name) print("You have (msg.coins) coins left")
In this program, the return type is of tuple that contains the variable name with the type. The main advantage of this is you can access the result using the variable name as msg.name and msg.coins instead of msg.0 and msg.1.
Function with argument label
When you define a function that accepts inputs, you can define the input name with the help of parameter name. However, there is another type of name which you can give along with the parameter name, known as argument label.
The use of argument labels allow a function to be called in an expressive way, sentence-like manner, while still providing a function body that is readable and clear in intent.
Each function parameter has both an argument label and a parameter name. By default, parameters use their parameter name as their argument label. But, if you explicitly define the argument name, the argument label is used when calling the function.
The syntax of function with argument label is
func funcname(argumentLabel parameterName:Type)-> Return Type ( //statements )
Let's see this in example below.
Example 7: Function without argument label
func sum(a:Int, b:Int) -> Int ( return a + b ) let result = sum(a: 2, b: 3) print("The sum is (result)")
When you run the above program, the output will be:
The sum is 5
In the above example, we have not specified the argument label, so it takes default parameter name a and bas the argument label while calling the function.
You may notice the function call is not expressive/sentence when calling the function. You may think it can be made more expressive as English if you could make the function call as:
let result = sum(of: 2, and: 3)
Now let's change the function as:
Example 8: Function with better function call but not as parameter names
func sum(of:Int, and:Int) -> Int ( return of + and ) let result = sum(of: 2, and: 3) print("The sum is (result)")
Now the method call is expressive. However, now we have to use the parameter name of & and in return of + and
to find the sum of two numbers. Now, this makes the function body unreadable. Use of a and b instead of of&and would make more sense inside the function body.
For this purpose we have to explicitly define argument label as:
Example 9: Function with argument labels
func sum(of a :Int, and b:Int) -> Int ( return a + b ) let result = sum(of: 2, and: 3) print("The sum is (result)")
In the above program, the function accepts two parameter of type Int
. The function call uses the argument label of & and which makes sense while calling the function as sum(of: 2, and: 3)
instead of sum(a: 2, b: 3)
.
Also, the function body uses the parameter name a and b instead of of & and which also makes more sense while applying operations.
You can also omit the argument label by writing a _
before the parameter name.
func sum(_ a :Int, _ b:Int) -> Int ( return a + b ) let result = sum(2, 3) print("The sum is (result)")
Function with default parameter values
You can give default values for any parameter in a function by assigning a value to the parameter after that parameter's type. Giving a default parameter allows you to neglect the parameter while calling the function.
If you do not pass value to the parameter while calling the function, its default value is used. However, if you explicitly pass a value to the parameter while calling, the specified value is used.
func funcname(parameterName:Type = value) -> Return Type ( //statements )
Example 10: Function with default parameter values
func sum(of a :Int = 7, and b:Int = 8) -> Int ( return a + b ) let result1 = sum(of: 2, and: 3) print("The sum is (result1)") let result2 = sum(of: 2) print("The sum is (result2)") let result3 = sum(and: 2) print("The sum is (result3)") let result4 = sum() print("The sum is (result4)")
When you run the above program, the output will be:
The sum is 5 The sum is 10 The sum is 9 The sum is 15
In the above program, the function sum(of a :Int = 7 , and b:Int = 8) -> Int
accepts two parameter of type Int
but also specifies the default value of parameter a = 7
and b = 8.
If you pass value as a parameter in the function call as sum(of: 2, and: 3)
then 2 and 3 is used instead of parameter default value.
But if you don't pass the parameter value as sum()
, then default value 7 and 8 are used as the parameter value.
Function with variadic parameters
A variadic parameter can accept zero or more values of a specific type. You can specify variadic parameter by inserting three period characters (… ) after the parameter's type name.
You usually use a variadic parameter when you need to pass a varying number of input values to the parameter when the function is called. For example, a list of numbers, a list of alphabets, etc.
The syntax of function with variadic parameters is:
func funcname(parameterName:Type… ) -> Return Type ( //statements )
Example 11: Function with variadic parameters
func sum(of numbers:Int… ) ( var result = 0 for num in numbers ( result += num ) print("The sum of numbers is (result)") ) sum(of: 1, 2, 3, 4, 5, 6, 7, 8)
In the above program, the function sum(of numbers:Int… )
accepts a variadic parameter of type Int
. A variadic parameter can accept multiple values separated by comma as sum(of: 1, 2, 3, 4, 5, 6, 7, 8)
.
The values 1, 2, 3, 4, 5, 6, 7, 8 passed as a variadic parameter are made available within the function's body as an array of the Int
type. Therefore, we can apply for-in
loop in the value as for num in numbers
.
When you run the above program, the output will be:
The sum of numbers is 36
Note: Swift built in print()
function also accepts variadic parameter of type Any
.
Any
represents to any data type in Swift e.g. Int
, Float
, Double
,String
etc.
Function with in-out parameters
When you define the function parameter, the function parameters cannot be modified inside the body. So they are constants by default. Let's see this in example:
func process(name:String) ( if name == ""( name = "guest" ) )
The above program results a compile-time error because you cannot change the value of a parameter.
If you want a function to modify a parameter's value, you need to define the parameter as in-out parameter. You write an in-out parameter by placing the inout
keyword right before a parameter's type.
Behind the scenes, an in-out parameter has a value that is passed into the function, is modified by the function, and is passed back out of the function to replace the original value. Therefore the value passed in the function call cannot be a constant. You must declare it as a variable.
The syntax of function with inout parameter is:
func funcname(parameterName:inout Type) -> Return Type ( //statements )
Example 12: Function with in out parameter
func process(name:inout String) ( if name == ""( name = "guest" ) ) var userName = "" process(name: &userName) print(userName)
When you run the above program, the output will be:
guest
In the above program, we have declared a function that accepts inout
parameter name so that the parameter can be changed/altered inside the body of the function.
You must use ampersand (&)
sign directly before a variable's name when you pass argument to an in-out parameter so that it can be modified by the function.